client objectives
Scope of works
AQL carried out a restoration and protection measures, including: Surface Preparation: The entire floor area was vacuum blasted to remove any dirt or grime and to prepare a suitable bonding surface for the application. A deep clean then took place to get rid of any debris from blasting and to remove any dust from the area. DPM Primer Coat- A DPM primer coat was then applied to stop any moisture penetrating through the floor, allow for optimal bonding and to seal the floor from air bubbles that may be present within the concrete. Epoxy Filler- Epoxy filler was used to remove any blemishes or imperfections within the floor Buff Sanding- Buff sanding and cleaning was completed between each coat to remove any imperfections and to increase bonding. Application of Chemical Resistant Topcoats- The topcoats of resin were then applied in the clients specified colour to give a sleek, aesthetically pleasing result while also being chemical resistant. Non-Slip Floor- During the application, anti-slip properties were added to the system to ensure the floor met non slip flooring standards. Highlighted Areas- Coats of red and yellow were then applied for walkways and line marking.